Table of Contents
Advertisement
Installation
NOTE: Electrical receptacle must be located so that it is easily accessible with machine in place. If machine is hard
wired, an intermediate shut-off box with a 3 mm gap is required to meet EN 60335-1, clauses 24.3 and 22.2 or 3.5 mm
gap is required to meet Standard IEC 60335-1, clauses 24.3 and 22.2. Gap is defined as the minimum contact
separation of each pole in the switch between the "ON" and "OFF" positions.
Earthing Instructions
The washer must be earthed. The washer must be
properly earthed in accordance with all local codes and
ordinances.
18
POWER CORD
FLW2145N
© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
FLW2145N
Figure 17
Improper connection of the equipment-
earthing conductor can result in a risk of
electric shock. Check with a qualified
electrician or service person if you are in
doubt as to whether the washer is
properly earthed.
HARDWIRE
FLW2146N
WARNING
FLW2146N
W032
803623 (EN)
Advertisement
Table of Contents
