Step 5: (Gravity Drain Models Only) Connect Drain Outlet To Drain System - Jim Chookagian NF3L Installation & Operation Manual

Installation
Standpipe Installation
Place the drain hose into the standpipe.
610 TO 914.4 mm
(24 TO 36 in.)
RECOMMENDED
HEIGHT
2
1 Standpipe 50.8 mm (2 in.) or 40 mm
(1-1/2 in.)
2 Beaded strap from accessory bag
Figure 8
12
1
FLW1943N
FLW1943N
© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
Step 5: (Gravity Drain Models Only)
Connect Drain Outlet to Drain System
Remove drain fitting (four inches long) and hose
clamp from accessories bag. Insert drain fitting into
drain outlet hose. Clamp hose and fitting.
Connect the drain fitting to a vented drain system
using a flexible connection (obtain locally). Inside
diameter of fitting is 38.9 mm (1.53 in.) and outside
diameter is 42.2 mm (1.66 in.). The drain system must
be vented to prevent an air lock or siphoning.
IMPORTANT: Increasing the drain hose length,
installing elbows, or causing bends will decrease
drain flow rates and increase drain times,
impairing machine performance.
2
1
1 Drain Trough
2 Drain Outlet Hose
Figure 9
FLW2091N
FLW2091N
803623 (EN)