Step 4: (Non-Gravity Drain Models Only) Connect Drain Hose To Drain Receptacle - Jim Chookagian NF3L Installation & Operation Manual

1
4
1 Water Supply Faucets
2 Hot Water Connection
3 Cold Water Connection
4 Fill Hoses
Figure 6
803623 (EN)
3
2
WATER
MIXING
VALVE
FLW1942N
FLW1942N
© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
Step 4: (Non-Gravity Drain Models Only)
Connect Drain Hose to Drain Receptacle
Remove the drain hose from its shipping position on
the rear of the washer by removing the shipping tape.
IMPORTANT: Drain receptacle must be capable of
handling a minimum of 35 mm (1-3/8 inch) outside
diameter drain hose.
1 Shipping Tape
Figure 7
Installation
1
FLW1953N
11