Table of Contents
Advertisement
To access this screen, use the the < (left arrow) or > (right arrow)
buttons either on the front panel or the IR remote until the Last
Command screen is displayed.
Setup Menu
The user setup menu is only accessible with an IR remote, not
from the front panel. The same settings can also be controlled from
the serial ports. Refer to the Serial Protocols document for more
information on the commands.
To start the setup menu, press "Setup" on the remote control.
Use the "Left" and "Right" buttons to navigate through the
different options.
Use the "Select" button to change any of the optional settings.
The menus are as follows:
Setup:Panel LEDs
This option will turn off all the front panel LED lights. The
matrix's behavior is otherwise unchanged. The default in ON.
Setup:Disp Lamp
This option will set the display brightness to one of four levels.
The default is 100%.
11
Delano Matrix Switch User's Guide (DOC42-00022-A_NeoPro-Delano.doc)
Advertisement
Table of Contents
