Table of Contents
Advertisement
Terminating the ends of the Cat5 cable can be done with either
TIA/EIA-568-B or A standard, so long as both ends are terminated
using the same standard. Below is the color codes for 568-B.
Although in some case of Ethernet where polarity of the pairs can
be swapped, with the Delano system each pair must be in the
correct order and polarity. A good practice is to use a cable tester
on each cable after termination to verify pin order before using the
cable.
RS-232 Serial
The serial port on the rear panel is labeled "RS-232". It is wired as
a "DCE" device, which means it should be connected to a normal
PCs RS-232 port with a straight through cable. Connection to most
Delano Matrix Switch User's Guide (DOC42-00022-A_NeoPro-Delano.doc)
Pin
1
2
3
4
5
6
7
8
Table 1: TIA/EIA-568-B wiring
Color
White / Orange
Orange
White / Green
Blue
White / Blue
Green
White / Brown
Brown
7
Advertisement
Table of Contents
