How To Hang Your Ceiling Fan - Emerson CF144BS00 Owner's Manual

Curva sky 44” & 52” damp & wet location snugger ceiling fan

Hide thumbs Also See for CF144BS00:

Owner's manual (17 pages)

Owner's manual (24 pages)

Table Of Contents

Table of Contents

WARNING

The fan must be hung with at least 7' of clearance from

floor to blades (Figure 5).

WARNING

The outlet box and joist must be securely mounted and

capable of supporting at least 50 lbs. Use only a U.L.

outlet box listed as "Acceptable for Fan Support of

22.7 kg. (50 lbs.) or less".

WARNING

To reduce the risk of fire, electric shock, or personal

injury, mount fan to outlet box marked "Acceptable for

Fan Support of 22.7 kg. (50 lbs.) or less", and use

screws supplied with outlet box. Most outlet boxes

commonly used for support of light fixtures are not

acceptable for fan support and may need to be

replaced. Consult a qualified electrician if in doubt.

1. Disconnect electrical power to the branch circuit at

the circuit breaker or fuse box before attempting to

install the ceiling fan mounting plate on the outlet

box.

WARNING

Turning off wall switch is not sufficient. To avoid

possible electrical shock, be sure electricity is turned

off at the main fuse box before wiring. All wiring must

be in accordance with National and Local codes and

the ceiling fan must be properly grounded as a

precaution against possible electrical shock.

2. Pull the electrical supply black, white and ground

wires through the center opening of the ceiling

mounting plate before securing the plate to the outlet

box (Figure 6).

3. Position the ceiling mounting plate onto the outlet box

and secure using the two outlet box screws, supplied

with outlet box (Figure 6).

4. Slide the ceiling trim ring over the fan motor

assembly and let it rest on the motor assembly

(Figure 7).

5. Place the motor assembly onto the ceiling mounting

plate hook during wiring fan motor assembly to outlet

box (Figure 8).