Rear Side - AER Compact 603 User Manual

Compact 60
twin channel acoustic amplifier
IB_Compact60 _20120529
3

3.2 Rear side

1) line out
The line out supplies a pre-amp signal taken after
tone-control, effects and master for forwarding to
other appliances.
2) headphones
This output enables you to connect stereo head-
phones and mutes the loudspeaker.
3) send
Send is an output to connect to an external effect
device and in conjunction with return (input) forms
a loop here designed as external effect loop. The ef-
fect can be switched on or off via footswitch.
4) return
Return as part of the effect loop operates as signal
input from an external effect device (from output
6
3
!!! Warning: Only use
headphones with stereo
jackplugs in this output
socket!!!
line out
headphones
C AU T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AT T E N T I O N
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
B
Made in Germany by
of the effect device). The effect can be switched on
or off via footswitch. Return on its own can also be
used as quasi auxiliary signal input (-10 dbV).
5) tuner
The tuner output supplies a pre-master signal (-9
dbV) to connect an external tuner to the Compact 60
6) footswitch
Connection socket for a double-footswitch (on-/
off-switch, tip = internal effect/ring = external effect
on/off ).
7) DI-out
Preamp-output with symmetrical signal, after tone-
control, pre master, without effects.
8) power on
Combined mains
with mains socket and fuse
holder.
RISQUE DE CHOC ELECTRIQUE
1 3 5
send tuner
2 4 6
return footswitch DI-out
tip = int. efx 1 = gnd
ring = ext. efx 2 = pos
on/off 3 = neg
power on
8
switch
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AT T E N T I O N
NE PAS OUVRIR
7
.
3