Controls And Connections; Front Side; Rear Side - AER Cubello User Manual

3. Controls and connections

1 2 3
gain bass
INPUT
cubello
INSTRUMENT

3.1 Front side

1) INPUT instrument or line input, mono jack socket, ¼" (6.35 mm)
2) gain input level control
3) bass
bass tone control
4) treble
treble tone control
5) INPUT microphone input, combo socket for ¼" (6.35 mm) jack or XLR, with following
connection options:
· XLR connector: microphone, balanced, with 48 V phantom power
· stereo jack connector: microphone, balanced, without phantom power
· mono jack connector: microphone, unbalanced, without phantom power
6) aux in
3.5 mm (stereo) jack socket for Stereo general sources with line level, e.g. CD player
7) bluetooth activation switch wireless audio
8) pan eff ect distribution control
9) select
eff ect selection switch
10) level level control internal eff ect
11) clip overload indicator
12) master master volume control
13) power power on/off indicator lamp
14) headphones output for headphones. The loudspeaker of the amplifi er is
switched off when this socket is used.
15) line out preamplifi er output post master and tone controls, with eff ects

3.2 Rear side

16) power on/off
switch the Cubello on and off at the power on/
off switch of the mains inlet combination with
integrated fuse holder.
10
4 5 2
treble
gain
INPUT
XLR = P48
= reverb
= delay
3 4 6
bass treble
aux in Blue
tooth
off
on
AUX_BLUEtooth
MICROPHONE
= off = on
16
7 8 9 10 11 12
master
pan level
select
clip
reverb
delay
EFFECTS
mains & master
13 14
headphones
power
15
line out
inputs
eff ects