Rear Side - AER COMPACT MOBILE 2 User Manual

Compact Mobile
battery-powered acoustic ampli er
Compact Mobile
battery-powered acoustic ampli er
CAU T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AT T E N T I O N
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
CAU T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AT T E N T I O N
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
IF_CPM_120718

3.2 Rear side

IF_CPM_120718
1) aux in: stereo input for additional signal sour-
ces, e.g. CD-player, Cinch/RCA-sockets (white =
left channel, red = right channel)
2) line out: The line out supplies a pre-amp signal
taken after tone-control, eff ects and master for
forwarding to other appliances.
3) headphones: This output enables you to
connect stereo headphones and mutes the
loudspeaker.
!!! Warning: Only use headphones
with stereo jackplugs in this output
socket!!!
4) send: Send is an output to connect to an exter-
nal eff ect device and in conjunction with return
(input) forms a loop here designed as external
eff ect loop. The eff ect can be switched on or off
via footswitch.
5) return: Return as part of the eff ect loop
operates as signal input from an external eff ect
device (from output of the eff ect device). The
eff ect can be switched on or off via footswitch.
Return on its own can also be used as quasi
auxiliary signal input (-10 dbV).
16
L
1
R
L
aux in
2
R
aux in
2
12V DC only
1= – / 2= +
9
12V DC only
1= – / 2= +
6) tuner: The tuner output supplies a pre-master
signal (-9 dbV) to connect an external tuner to
the Compact Mobile 2.
7) footswitch: Connection socket for a double-
footswitch (on-/off -switch, tip = internal eff ect/
ring = external eff ect on/off ).
8) DI-out: Preamp-output with symmetrical
signal, after tone-control, pre master, without
eff ects.
9) 12V DC only: Connection socket for an optional
12V-cable to an external battery.
10) DC on/off : On/off -switch for the connection
socket (9).
11) power on: Combined mains switch with mains
socket and fuse holder.
line send tuner
out
2 4 6
headphones return footswitch
line send tuner
5 7
tip = int. efx
3
out
ring = ext. efx
on/o
headphones return footswitch
tip = int. efx
ring = ext. efx
on/o
power on
DC
on/o
10 11
power on
DC
on/o
8
DI-out
1 = gnd
2 = pos
3 = neg
DI-out
1 = gnd
2 = pos
3 = neg