AER Domino 2A User Manual
  1. Manuals
  2. Brands
  3. AER Manuals
  4. Amplifier
  5. Domino 2A
  6. User manual

AER Domino 2A User Manual

Hide thumbs Also See for Domino 2A:
Table of Contents

Advertisement

Quick Links

user manual
Domino
A
2.
1

Advertisement

Table of Contents
loading

Related Manuals for AER Domino 2A

Summary of Contents for AER Domino 2A

  • Page 1 user manual Domino...

  • Page 2: Table Of Contents

    3.1 Front Side 3.2 Rear Side 4. Starting up 4.1 Cabling and Switching-on 4.2 Level Adjustment 5. Functional characteristics 5.1 Mute 5.2 Equalization 5.3 Effects 5.4 Phantom-Power 5.5 Stereo-Simulation 5.6 Insert-Loop 5.7 Connecting AER-amps via Insert-Loop 6. Technical Specifications 7. Circuit Diagram...

  • Page 3: Introduction

    8“-twin-cone loudspeakers, 1“-neodym tweeter for ad- ditional headroom, 4 inputs with mute-option (inputs 3 and 4 with shared equalization), channel mute, in- sert-link feature and AER-32/24-bit-digital-effects with 16 presets. Read on and have fun using your Domino...

  • Page 4: Safety Instructions

    2. Safety Instructions The following guidelines shall help minimize the risk of injury through fire or electric shock. 1. Carefully read these safety notes before you use the device! 2. Keep these safety notes in a safe place. 3. Pay attention to all warnings, instructions and ad- ditional texts on the unit.

  • Page 5: Controls And Connections

    3. Controls and Connections input input gain bass middle treble eff. send gain mute attn. clip colour mute line/mic clip colour Domino channel one input input gain gain bass middle treble eff. send select return mute line/mic mute attn. clip colour stereo sim.

  • Page 6: Rear Side

    7) insert: insert point, 6,3 mm stereo-jack-plug, 15) power on: Combined mains switch with tip = send, ring = return, for serial looping of mains socket and fuse holder. (s. Technical Data effect-devices or for connecting AER-amps with Mains Fuse) link-feature. (see para. 5.6, page 10)

  • Page 7: Starting Up

    4. Starting up The clip-LED indicates an overload. A short flicker is of no danger to AER devices. During operation a short flicker can be accepted, to be on the safe side you 4.1 Cabling and switching on should reduce the gain slightly to achieve an optimal Before connecting to mains, please ensure that your and distortion-free performance.

  • Page 8: Functional Characteristics

    (internal) digital The mute switch turns the appliance to mute as requi- red. The function can also be activated by a standard 32/24-bit-AER-effect processor, with the select-switch footswitch (on/off switch). you can choose between 16 diverging presets (s.

  • Page 9: Phantom-Power

    You can use these considerable malfunctions and damage may result sockets to connect additional active AER fullrange- as well. systems (e.g. AG 8 , CX 8, AS Q8, AS 281), whose levels...

  • Page 10: Insert-Loop

    (tip and ring = hot, sleeve = ground) to mono-jack. The particular AER-link-application (s. no. 3 - link between AER-amps) is re- presented on page 11. In link-operation it is assured, that the signals of all con- nected amps are hearable on all devices, even with different effect settings.

  • Page 11: Connecting Aer-Amps Via Insert-Loop

    5.7 Example for the linking of AER-amps via the insert connection input middle treble eff. send gain bass middle treble eff. send mute line/mic clip colour channel one channel two PA-System PA-System effect 2 middle treble eff. send select return master stereo sim.

  • Page 12: Technical Specifications

    6. Technical Specifications Domino , page 1 Technical data Inputs tuner Tuner output, before tone controls and effects, not affected by mute channel one, High impedance, unbalanced instrument or Mono jack, ¼” (6.35 mm) channel four line inputs Output voltage: 330 mV (–10 dBV) Mono jack socket, ¼“...
  • Page 13 6. Technical Specifications Domino , page 2 NOTES Tone controls Rated conditions: Note: Channels 3 and 4 share the same tone controls. Input 50 mV rms / 1 kHz at channel one. All channels colour –3 dB at 700 Hz Gain of channel one fully clockwise.

  • Page 14: Circuit Diagram

    Optional +15V GAIN INPUT BUFFER PREAMP ATTENUATOR MUTE FOOTSWITCH MUTE CH1/CH2 SEND1 FOOTSWITCH MUTE CH3/CH4 DSP EFFECTS UNIT SEND2 RETURN SEND3/4 SUBSO SELECT AUX RETURN AUX IN (CINCH) EFFECT 2 RETURN EXT. EFF. RETURN FOOTSWITCH EFFECT INT./EXT. www.aer-amps.com Domino - 2012_07_GB...
  • Page 15 SPEAKER MUTE POWER AMP 200mm (8") DUAL CONE SUBSONIC LIMITER SELECT AUX RETURN AUX IN (CINCH) POWER AMP 200mm (8") DUAL CONE EFFECT 2 RETURN 25mm (1") DOME TWEETER EXT. EFF. RETURN FOOTSWITCH EFFECT INT./EXT. B120508A_20120627 www.aer-amps.com Domino - 2012_07_GB...
  • Page 16 Domino - 2012_07_GB...

Table of Contents