All AER-systems are subtly dynamically controlled, which ensures absolute reliability in full load opera- tion despite strikingly small sizes and little weight. Read on and have fun using your Compact 60...
2. Safety instructions The following guidelines shall help minimize the risk 8. There are no user-serviceable components inside the unit. To avoid the risk of an electric shock, the of injury through fire or electric shock. unit must not be opened. All maintenance, adjust- 1.
3. Controls and connections 13 14 15 Compact 60 IF_Compact60 _20120529 3.1 Front side 1) input (ch. 1) signal input, socket for 6,3 mm mono jackplug 2) high/low input sensitivity switch, attenuator = off = on 3) clip overload indicator 4) gain input level control 5) colour...
line out send tuner Compact 60 headphones return footswitch DI-out = int. efx 1 = gnd twin channel acoustic amplifier ring = ext. efx 2 = pos on/off 3 = neg power on C AU T I O N RISK OF ELECTRIC SHOCK DO NOT OPEN AT T E N T I O N RISQUE DE CHOC ELECTRIQUE...
If you spot an intensified fli- The clip-LED indicates an overload. A short flicker ckering of the clip indicator, level the signal level is of no danger to AER devices. During operation a with the gain control (s. 4.2 Level adjustment).
DI output etc.) which are not protected against phantom power applied to their XLR output. (The DI connectors on AER products are protected against applied phantom power.) Other audio devices (such as preamps, effects pe- dals etc.) whose unbalanced line output was repla-...
Stereo jack socket ¼” (6.35 mm) for a dual care. Read the operating instructions. footswitch Tip = internal effect on/off Ring = external effect on/off Specifications and appearance subject to change without notice. Sleeve = common (ground) TD20120605 www.aer-amps.com Compact 60 - 2012_05_GB...
Need help?
Do you have a question about the Compact 603 and is the answer not in the manual?
Questions and answers