Rear Side - AER Compact XL User Manual

gnd
lift
Compact XL
gnd
lift
CXL_IB_120731

3.2 Rear side

1) gnd lift
Disconnects signal ground from protective
CXL_IB_120731
ground, thereby eliminating hum problems
with so-called ground loops. This button
should normally remain switched off.
2) 9 V (ch. 1)
Switches on the 9 V phantom power for
channel 1 (see 5.4)
3) aux evel
Level control for aux in
4) aux in
Auxiliary input, 3.5 mm jack socket.
Additional input for general sources
with line level, e.g. CD player
Mono or stereo jack plugs can be used.
5) footswitch
Connector for a dual footswitch switching the
internal and external effect on/off.
Stereo jack socket, assignment:
Tip = switch for internal effect
Ring = switch for external effect (send /
return)
6) tuner
Output, pre master, for a tuner.
9 V level aux in footswitch
The Acoustic People
L
R
phantom tip = int. e .
power ring = ext. e .
2 3
1 4 5
9 V level aux in footswitch
L
R
phantom tip = int. e .
power ring = ext. e .
tuner line out level DI-out
9
6 7 8
tuner line out level DI-out
7) line out
Preamplifier output post master and tone
controls, with effects
8) level
DI-signal-level
9) DI-out
Balanced XLR output, pre master, switchable
with or without effects.
10) send
Output for external, parallel effect loop (see
5.2) in conjunction with return
11) return
Input of the external, parallel effect path
Can also be used alone as an additional
input.
12) headphones
Output for headphones. The loudspeaker
of the amplifier is switched off when this
socket is used.
13) power on
Power on/off switch, combined with mains
inlet (IEC C14 type) and compartment for
mains fuse (see technical data).
send return headphones
11 12
10
send return headphones
13
11