Safety Instructions - AER Compact 603 User Manual

2. Safety instructions

The following guidelines shall help minimize the risk
of injury through fire or electric shock.
1. Carefully read these safety notes before you use
the device!
2. Keep these safety notes in a safe place.
3. Pay attention to all warnings, instructions and ad-
ditional texts on the unit.
4. Do not install or use your device in close proximity
to water or if you are wet yourself.
5. Use your device in a safe place where nobody can
step on cables or trip over and damage them.
6. Always pull the mains plug before cleaning your
device. Use only a dry cloth for cleaning. Avoid the
use of detergents and do not let any liquids seep
into the unit.
7. Never install your device close to units with strong
electromagnetic fields such as large mains transfor-
mers, revolving machines, neon illumination etc. Do
not lay signal cables parallel to power current cables.
4
8. There are no user-serviceable components inside
the unit. To avoid the risk of an electric shock, the
unit must not be opened. All maintenance, adjust-
ment and repair works should be carried out by
qualified staff only. Any unauthorized tampering will
void the 2-year warranty.
9. In keeping with the EMV regulations screened
cables with correctly fitted connectors must be used
for all signal connections.
10. Always use an earthed power supply with the
correct mains voltage. If you are in doubt about the
power outlets ground, have it checked by a qualified
technician.
11. Cable up your device only when it is powered off
.