Section 3: Nav Pages; Main; Nav - Garmin GNS 430 Pilot's Manual And Reference

SECTION 3: NAV PAGES

3.1 MAIN PAGE GROUPS
The GNS 430' s main pages are divided into four
separate page groups: NAV, WPT, AUX, and NRST
(Table 3-1). Each page group is comprised of multiple
pages. The page groups are selected using the large right
knob. The individual pages are selected using the small
right knob.
Page Groups
NAV Group WPT Group
7 NAV Pages see Section 7 see Section 10 see Section 8
Table 3-1 Page Groups
The bottom right corner of the screen (Figure 3-1)
indicates which page group is currently being displayed
(e.g., NAV, WPT, AUX, or NRST), the number of screens
available within that group (indicated by the square icons),
and the placement of the current screen within that group
(indicated by a highlighted square icon).
Current Page Group
Figure 3-1 Current Page and Page Group
AUX Group NRST Group
Position of
Current Page
within Current
Page Group
Number of Pages in
Current Page Group
GNS 430 Pilot's Guide and Reference
To select the desired page group (from any
page):
Press and hold the CLR Key to select the
Default NAV Page. Turn the large right knob
to select the desired page group (Table 3-1 and
Figure 3-1).
To select the desired page within the
group:
Turn the small right knob to select the desired
page (Figures 3-1 and 3-2).
3.2 NAV PAGE GROUP
The NAV Page Group includes seven pages (Figure
3-2). While viewing any NAV page, turn the small right
knob to select a different NAV page. The pilot may find
this selection process convenient to cycle between the
Default NAV Page and the Map Page, which are two of the
most frequently used pages. Other pages are provided for
terrain information (if configured for TERRAIN), to list
frequencies for the flight plan, show the current position,
display current satellite reception, and make vertical
navigation settings.
Map
Default NAV
NAVCOM
Position
VNAV
Figure 3-2 NAV Pages
SECTION 3
NAV PAGES
TERRAIN
(if configured)
Satellite Status
3-1