Setting The Dial Mode; Setting The Flash Time; Setting The Area Code - Motorola L701BT User Manual

4. When the other handset answers the intercom call, press MENU on the calling
handset to set up the conference call.
5. Press /HOME on any handset to end a three-party conference call and leave the
other handset engaged with the caller.
NOTE
During an external call, pressing
call and set up a conference call.
3.22

Setting the dial mode

The default dialing mode is suitable for your country and network operator. It is unlikely that
you should need to change this setting unless advised to do so.
1. Press MENU and then VOL+ or REDIAL/VOL- to select
2. Press MENU to select
3. Press MENU and then VOL+ or REDIAL/VOL- to select
4. Press MENU to save the setting.
NOTE
If pulse mode is selected, press */TONE to switch from pulse to tone dialing temporarily when
dialing out. After the call is ended, the dial mode will change back to pulse automatically.
3.23

Setting the flash time

The default flash time is suitable for your country and network operator. It is unlikely that you
should need to change this setting unless advised to do so.
1. Press MENU and then VOL+ or REDIAL/VOL- to select
2. Press MENU and then VOL+ or REDIAL/VOL- to select
3. Press MENU and then VOL+ or REDIAL/VOL- to the flash time you want. (8 options
are available: 90, 100, 110, 250, 300, 400,
4. Press MENU to save the setting.
3.24

Setting the area code

1. Press MENU and then VOL+ or REDIAL/VOL- to select
2. Press MENU and then VOL+ or REDIAL/VOL- to select
3. Press MENU and enter the area code.
4. Press MENU to save the setting.
USING THE PHONE
/HOME or
DIAL MODE.
600 and 700MS)
/SPEAKER on any handset, will join in the
SETUP BS.
TONE or PULSE.
SETUP BS.
FLASH TIME.
SETUP BS.
AREA CODE.
23