Gprs Setting - Xexun TK102-2 User Manual

Cancel: Send SMS readsd+password+space+0 to ask the tracker to stop sending data
in the SD card to the server.

5.22 GPRS Setting

In order to use GPRS function, the user needs to set IP, Port and APN ( access point
name ) by either cell phone, or our PC software.
（ NOTE: Some countries or regions should set APN's User Name and APN's
Password.）
5.22.1 Set an IP address and port:
Setup: Send SMS adminip+123456+space+IP address+space+port.
If setup successful, the tracker will reply SMS "adminip ok"
Cancel: Send SMS noadminip+123456
5.22.2 Set APN
Setup: Send SMS apn+123456+space+specify apn content.
If setup successful, the tracker will reply SMS "APN ok".
Cancel: The old APN will be invalid automatically when a new APN is set.
5.22.3 Set APN's User Name
Setup: Send SMS apnuser+123456+space+the sim card's user name.
If setup successful, the tracker will reply SMS "apnuser ok".
Cancel: The old APN user name will be invalid automatically when a new APN uer
name is set.
5.22.4 Set APN's Password
Setup: Send SMS apnpasswd+123456+space+the sim card's password.
If setup successful, the tracker will reply SMS "apnpasswrod ok".
Cancel: The old APN password will be invalid automatically when a new APN password
WWW.GPS-TEKNIK.SE
WWW.GPS-TEKNIK.EU
DEVELOPER@GPS-TEKNIK.SE FORUM - WWW.GPS-TEKNIK.EU 13