Table of Contents
Advertisement
OIL TEMPERATURE SENSOR
OIL FILTER BYPASS
OIL FILTER BYPASS
ANTI DRAIN BACK
OIL FILTER ELEMENT
OIL RESERVOIR SCREEN
OIL RESERVOIR SCREEN
L U B R I C AT I O N S Y S T E M
OIL PRESSURE SWITCH
OIL PRESSURE SWITCH
OIL FILTER DRAIN
OIL COOLER BYPASS
Oil Filter Base & Valves
• The oil filter base routes oil to the oil filter,
engine oil pressure switch (EOP), engine oil
temperature sensor (EOT), and the
turbocharger oil feed.
• The oil filter base also houses the anti-drain-
back check valve that keeps oil in the oil
filter assembly after the engine is shut off.
• The oil cooler bypass is in the filter base and
opens at a pressure differential of 25 psi.
• The oil filter bypass is in the oil filter stand
pipe and opens at a pressure differential of
20 psi.
• There is an oil drain for the filter housing to
drain oil from the housing during an oil
change.
45
Oil Filter
• The 6.0L POWER STROKE uses a cartridge
style oil filter, located on the top of the
engine.
• When the oil filter is removed, the oil filter
housing drain valve is automatically opened
to drain most of the oil from the housing.
• The oil filter element snaps into the oil filter
lid.
• Note: The oil filter lid should be removed
before draining the oil from the oil pan so
that the oil can drain from the filter
housing into the oil pan.
46
Oil Reservoir & Screen
• The oil reservoir for the high pressure oil
pump is located under the oil cooler in the
valley of the engine.
• The oil reservoir holds about 1qt of oil.
• A screen in the oil reservoir catches any
large debris that may be in the oil before it
gets to the high pressure oil pump.
47
25
Advertisement
Table of Contents
