Warming The Boilers - KitchenAid KES2102 Instructions Manual

OPERATING THE ESPRESSO MACHINE

Warming the boilers

Make certain the steam dial is closed by
1
rotating it clockwise as far as possible.
Place a coffee cup underneath the brew
3
head. Do not attach the portafilter to
the brew head.
Place the frothing pitcher under the
5
nozzle of the frothing arm.
Press and hold the On/Off power
2
button until the ON indicator lights up.
The dual boilers will begin heating, and
the Espresso and Hot Water functions
will begin to operate.
Press the Espresso button to activate
4
the water pump and fill the brewing
boiler with water. After a few seconds,
water will flow from the brew head.
When the cup is full, press the
Espresso button again to stop the
water pump. The brewing boiler is
now ready for use.
Slowly open the Steam dial by turning it
6
counter-clockwise; press and hold the
Hot Water button to activate the water
pump and fill the frothing boiler. After
a few seconds, water will start flowing
from the nozzle.
9