ASSEMBLING THE ESPRESSO MACHINE
Connecting the Espresso Machine
Electrical Shock Hazard
Plug into a grounded 3 prong
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
OPERATING THE ESPRESSO MACHINE
Rinsing and filling the boilers
The boilers need to be filled and rinsed before the Espresso Machine is used for the first time.
The boilers will also need to be filled when:
- the Espresso Machine is not used for a prolonged period
- the water reservoir runs dry during use (this can damage the Espresso Machine)
- multiple beverages are steamed without brewing espresso or dispensing hot water
Remove the reservoir and rinse with
fresh cold water, empty, and place back
onto the Espresso Machine.
IMPORTANT: Distilled water or mineral water can damage the Espresso Machine. Do
not use either to brew espresso.
Insert the end of the electrical cord without
prongs into the cord receptacle in the back of
the Espresso Machine. Plug the other end of
the cord into a grounded 3 prong outlet.
Slide the water reservoir left or right to
expose the top, and fill with fresh cold
water to the "max fill" line.