NEC Univerge SV8100 Reference Sheet page 4

CALLBACK
If you dial a busy extension:

Dial # and hang up.
 Replace the handset.
During this time you may make and receive
calls.

When both extensions are free, your
phone will ring.

Lift the handset and the other extension
will ring.
To Cancel:

Lift the handset and dial access code
770.
CALL FORWARD – ALL
Forwards all calls immediately.
To Set:
 Lift the handset and dial the Call Forward
All Access code 741.
 Dial 1 to set.

Dial the destination number.
 Replace the handset.
To Cancel:
 Lift the handset and dial 741.

Dial 0 to cancel.

Replace the handset
CALL FORWARD NO ANSWER
Forwards calls only after 4 – 6 rings.
To Set:
 Lift the handset and dial the Call Forward
No Access code 743.
 Dial 1 to set.

Dial the destination number.

Replace the handset.
To Cancel:
 Lift the handset and dial 743.

Dial 0 to cancel.

Replace the handset.
CALL FORWARD BUSY
Forwards calls when your extension is busy.
To Set:

Lift the handset dial 742.

Dial 1 to set.
 Dial the destination number.

Replace the handset.
To Cancel:

Lift the handset and dial 742.
 Dial 0 to cancel.

Replace the handset.
LOGIN/LOGOUT
For IP telephones only.
To Login:

Enter the Login code and press SET soft
key.

Enter the password and press OK soft
key.
To Logout:
 Press the LOGOUT key (Display will
show LOGOUT?).
 Press the LOGOUT key again and wait a
few seconds for the handset to logout.
CALL PICK UP
To answer a ringing extension in your
group:
 Lift the handset and dial  #.
For answering ringing extensions not in
your group:

Lift the handset, dial 768 plus ringing
extension number.
VOICECALL
Allows a user to intercom other digital handsets.

Lift the handset and dial extension
number.

Press Voice soft key and speak over the
intercom.
PROGRAMMING SPEED NUMBERS
To store a Speed Dial number (display
telephones only):

Press Speaker.

Dial 753 (for system).
 Dial telephone number you want to store
(up to 24 digits).
 Press Hold.

Enter Speed Dialing storage location.
 If desired, enter name using dial pad.

Press Speaker to hang up.
To dial a System Speed Dial number:

Without lifting the handset, press the
Redial key.

Press the Cursor button up or down to
search for the required number.

Go Off-hook to dial
DISPLAY
To adjust the display:
Press the Cursor button up or down while the
telephone is idle.
SPEAKER/RECEIVER VOLUME
To adjust the Speaker/Receiver volume:
Press the Cursor button up or down during
conversation.
RINGER VOLUME
To adjust the ringer volume:
Press the Cursor button up or down during
ringing.
SHORTCUT MENU
The user can access the shortcut menu by
pressing the Enter key (center cursor button).
31143
Issue 1.0