Engine Access - Interior - Winnebago Suncruiser Owner's Manual

To Close Hood Panel
• Pull Hood Panel DOWN and swing IN.
• Press top edge of Hood Panel in firmly with
palms of hands to ensure proper latching.
ENGINE ACCESS – INTERIOR
Front Engine Cover
(Located between cab seats)
NOTE: Take precautions to protect carpet and
interior furnishings when removing
engine cover. The underside of the engine
cover could contain deposits of oil and
fuel or other engine fluids and
substances that could damage fabrics
and interior furnishings.
• To remove the engine cover, insert the
supplied hex wrench into the hole (located on
the top center or the front edge of the engine
cover, depending on model).
• Turn the hex wrench to the left (counter-
clockwise) to unlock.
DRIVING YOUR MOTORHOME
• Insert hex wrench into the hole located on the
top center of the engine cover (as shown) or
the front edge of engine cover (depending on
model) to unlock.
-Typical installation shown
NOTE: On certain models, there may also be
additional screws to remove at the lower
front corners on each side of the engine
cover. See following photo.
• Remove screws at the lower front corners on
each side of the engine cover (if equipped).
-Typical installation shown
• Remove engine cover and set aside.
-Typical View
SECTION 3 –
3-15