Winnebago Suncruiser Owner's Manual page 125

1. Release both latches on the table leg to unlock.
2. Lift edges of the dinette cushions up and push
the dinette table straight down. Make sure the
table is lowered as far as it will go so when
arranging the cushions to cover the bed area,
they are even with the other dinette cushions.
NOTE: You may find it easier to remove the
dinette cushions completely before
lowering the table, especially if just one
person is converting the dinette into bed
position.
3. Secure both latches on the table leg to lock in
lowered position.
FURNITURE AND SOFTGOODS
4. Arrange cushions to cover bed area.
NOTE: The cushions to cover the dining table
section are located under the center
dinette seat (lift removable panel below
seat cushion to access) or you may use
the back dinette seat cushion and two
bolster cushions, depending on model.
Reverse steps to reassemble to dinette
configuration. Once the table is up, secure both
latches on the table leg.
WARNING
Failure to engage both latches when the
table is raised may result in injury.
SECTION 9 –
9-9