Table of Contents
Advertisement
24
14. Select Apply to commit the updates to the selected Access Point's configuration.
15. Expand the Configuration menu item and select Wireless.
The Wireless screen displays fields where Radio Settings and Wireless LAN settings can be defined.
Motorola Solutions recommends default radio settings remain as is for the Access Point's basic setup. For
information on using WiNG Express beyond this initial setup, refer to the Motorola Solutions WiNG
Express Users Guide. The guide is available at https://portal.motorolasolutions.com/Support/US-EN.
In respect to the Radio Settings, the professional installer should be aware of the following:
NOTE
•
The Channels available for configuration are channels for which the product is approved in its
selected country. The professional installer must ensure the product is set to operate under
conditions, and on channels, approved by country regulations.
•
Selecting Smart as the Power setting automatically configures radio power to not exceed the
maximum power allowed by the defined country. For static power settings, the professional installer
must ensure the configured power levels are compliant with local and regional regulations. The
county selected automatically limits the maximum output power that can be set.
•
For external antenna model Access Points, configure the Antenna Gain based on the antenna used
in the deployment. The set gain value should include the antenna gain, along with any additional
components, such as extension cables used between the Access Point and the antenna.
In respect to the Wireless LAN settings, the professional installer should be aware WiNG Express
Access Points ship with a default WLAN (WINGExpress). However, this WLAN does not provide adequate
authentication to protect from unauthorized user access. Motorola Solutions recommends an additional
WLAN configuration be created and validated before deleting default WLAN.
The above example includes a field for setting the antenna gain. This
setting is only available for external antenna model Access Points and
does not display for internal antenna model Access Points.
AP-6521E Access Point
Advertisement
Table of Contents
