Table of Contents
Advertisement
EN
3 / USING YOUR APPLIANCE
• DESCRIPTION OF CONTROL PANEL
A
B
C
•Speed selection
- Every time the speed selection button
2, 3 or 4 then return to speed 1.
- Every time the hood is used it will start up at the speed 1.
•Timer selection
— Pressing
will activate the timer; the hood will shut down after 10 minutes. The speed will
flash on the display to tell you that the hood is in timer mode.
•
FILTER CARTRIDGE SATURATION INDICATOR
The
symbol will flash on the display after 30 hours of operation of the hood. This message
tells you that that it is necessary to clean your filter cartridge.
After cleaning the filter cartridge, press button
Tip
This Guide to Installation and Use is valid for several models. Minor differences in
details and fittings may emerge between your appliance and the descriptions provided.
A
B
Lighting
On/Off
Speed selection
(1 to 4)
C
D
D
Indicator
Speed display (1, 2, 3 or 4)
Filter saturation
Timer/Delayed shutdown (10
E
Min)
is pressed, the following cycle is defined: speed 1,
for 3 seconds to stop the warning light
28
E
Advertisement
Table of Contents
