Table of Contents
Advertisement
PC Camera Audio Setup
If you wish to capture video & audio with your camera, it is necessary to setup the audio recording options in
Windows.
1.
Click Start, and click Control Panel (or point to Settings and click Control Panel).
2.
Click Sound
(Hardware and Sound).
3.
Click Recording (tab).
4.
Right-click Microphone (Realtek High Definition Audio) and make sure the item is not disabled.
5.
Double-click Microphone (or select Properties from the right-click menu).
6.
Click Levels (tab), and adjust the Microphone and Microphone Boost sliders to the level required.
7.
Click OK and close the control panels.
8.
Run the camera application program from the desktop shortcut.
9.
Go to the Devices menu heading and select Microphone (Realtek....) (it should have a tick alongside it).
10. Go to the Capture menu heading and select Capture Audio (it should have a tick alongside it).
11. To obtain the best sound recording quality enable Noise Suppression in the Realtek HD Audio Manager
control panel (see
"Setup for Audio Recording" on page D -
15).
PC Camera Module (Windows 7) D - 29
Windows 7
Advertisement
Table of Contents
Need help?
Do you have a question about the UNO 2.1 and is the answer not in the manual?
Questions and answers