Pride Mobility Jazzy Elite ES Owner's Manual page 13

I V . A S S E M B L Y A N D D I S A S S E M B L Y
To assemble the Jazzy Elite ES Portable:
1. Put the rear section of the power base and the front section of the power base together.
2. Reinstall the safety snap pins.
3. Reinstall the batteries into the power base.
4. Fasten the battery strap (not shown).
5. Reconnect the quick release power module connector.
6. Reconnect the quick release battery connectors.
7. Reinstall the main shroud by lowering it over the seat post. Slide the main shroud backward until the tabs are
secured with the body shroud. Once secure, press firmly on the rear of the main shroud until the main shroud
snaps into place.
8. Reinstall the seat.
9. Reconnect the controller to the power base.
Jazzy Elite ES Series www.pridemobility.com 13