Dome Setups; Switch Definition - CBC ZC-PT212 Installation Manual

Installation Guide
STEP 6
Screw the dome cover and body
together.
STEP 7
Set the switches located on the
bottom of the dome body. Refer to
section 3.3 Dome Setups for detailed
information
setting.
3.3

Dome Setups

Before connecting the dome camera to other devices of CCTV system,
please complete the dome ID and communication switch setting. These
switches are located on the bottom of the dome camera.
3.3.1

Switch Definition

Please refer to the following figures and table for switch location and
definitions.
about various
Indoor Dome
A Reserved
B Communication Switch
C Dome ID Switch
D Dome Control Protocol Switch
E RJ-45 Connector (for IP Dome only)
F 22-Pin Connector
G ISP Connector (for FW upgrade)
switch
Outdoor Dome
13