Table of Contents
Advertisement
Connecting the Cable Modem
8.
When the "Completing the Found New Hardware Wizard" window appears, click "Finish" to complete
the process (Fig. 30).
9. The cable modem installation is now complete. To validate a proper installation, perform the following
instructions:
•
Click on the "Start" icon in the lower left-hand corner of your screen.
•
Select "Settings," followed by "Control Panel." The "Control Panel" window will appear.
•
Double-click on the "System" icon, and select the "Device Manager."
•
Scroll down the list until you come to "Network Adapters." Double-click on "Network Adapters."
•
The "RCA or Thomson USB Cable Modem" should exist. If "RCA or Thomson USB Cable Modem" does
not exist, the cable modem was NOT installed correctly. Go to Solution 2 on page 35.
Fig. 30
21
Advertisement
Table of Contents
