Table of Contents
Advertisement
1. XLL Panel Setup
1.5 Pairing the Remote Keypad
•
Press the XLL programming button and release for the
enrollment of a programming keypad.
•
Insert all LS14500 Lithium batteries into the keypad.
•
Do not mount the keypad. It will display one of the
following screens:
RSI (c) 2013
or
videofied.com
•
Press on both
CLR
and
ESC NO
and release. The indicator LED on the keypad will blink
rapidly. Wait for the keypad to pair.
•
If the keypad doesn't pair up with the panel and
shows «XX», it certainly means that it is still paired to
another system and needs to be reset. Take the batteries
out, and press repeatedly on the keypad tamper switch.
Then proceed to the above steps.
<=========XX=========>
keys at the same time
www.videofied.com
I N S T A L L A T I O N
M A N U A L
6
Hide quick links:
Advertisement
Table of Contents
