Powering And Initialization - Videofied XL200L Installation Manual

1. XLL Panel Setup

1.4 Powering and Initialization

• The panel is powered either with a mains power supply with 4 backup LR20 Alkaline batteries (Option 1 recommended) or with 4
LSH20 Lithium batteries (Option 2).
• Press and hold the PROGRAMMING BUTTON for 10 seconds, until the indicator LED blinks twice.
• The panel is now reset, a CMA, XMA or XMB has to be enrolled to configure the panel.
THE CONTROL PANEL MUST BE CONNECTED TO AN EXTERNAL POWER SUPPLY (OPTION 1)
Batteries cable
Option 1
Option 2
WHEN USING THE RINGTONE FEATURE OR SMARTPHONE APP.
Batteries connector
Mains Connector
www.videofied.com
I N S T A L L A T I O N
Programming button
M A N U A L
To install the power supply inside
the box, break the plastic
battery separator.
5