Xll Features Guide; Get To Access Level 4; How To Arm/Disarm The System - Videofied XL200L Installation Manual

3. XLL Features Guide

3.1 Get to Access level 4

Tue 29/10 11:23
DISARMED LVL:1
To unlock and get access to the installer level 4, you need to successively enter TWO codes
(in any order) :
• INSTALLER CODE (entered during intial programming)
• USER CODE (Level3): the user must authorize the installer to get access to the
configuration of his panel.

3.2 How to Arm/Disarm the System

When in the standby mode, the system can be armed with the embedded or remote keypad , the
remote keyfob and/or the embedded or remote badge reader.
Full arming with
user code
Enter your user code
With remote
keypad
and press
With remote
badge reader
BR250
With remote
keyfob
ACCESS LEVEL
Full arming with badge
Present your badge on
the keypad
OK or YES
( XMB model only)
Present your badge on
N/A
the badge reader
N/A
www.videofied.com
I N S T A L L A T I O N
OK or YES
1
Special Arming 1
Press
enter your user code
and press
N/A Press
M A N U A L
ACCESS LEVEL
LEVEL : 1
ACCESS LEVEL
LEVEL : 4
OK or YES
BADGE OR CODE
OK or YES
Special Arming 2
Press
/
press OK or YES
OK or YES enter your user code
N/A
Press
/
and
N/A
13