Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Total Gym JUMP TRAINER
Summary of Contents for Total Gym JUMP TRAINER
- Page 1 OWNER’S GUIDE | TOTAL GYM JUMP TRAINER ®...
- Page 2 We value you as a customer and your feedback is important to us. If you have any questions or need further information about your Total Gym Jump Trainer, please contact our customer experience department at (858) 586-6080 or email support@totalgym.com.
-
Page 3: Table Of Contents
TOTAL GYM JUMP TRAINER OWNER’S GUIDE | TABLE OF CONTENTS ® Table of Contents Safety Precautions ....................4 Slide Distance Regulator (SDR) Instructions ............13 Parts Identifier ......................5 Resistance Charts ....................13 Specifications and Limitations ................6 Maintenance and Care ..................14 Maintenance Schedule .................... -
Page 4: Safety Precautions
If any pain or tightness in the chest in severe or fatal injury. Your Total Gym Jump Trainer must be bolted to the floor on a occurs, an irregular heartbeat, shortness of breath, faintness, nausea or dizziness is flat, solid surface with nonskid material underneath. -
Page 5: Parts Identifier
TOTAL GYM JUMP TRAINER OWNER’S GUIDE | PARTS IDENTIFIER ® Parts Identifier Right Rail Squat Stand Left Rail Glideboard Handles Incline Release Lever Incline Strut Slide Safety Lock Distance Regulator (SDR) Variable Resistance Bands Right Squat Strut Rear Struts Rear Base... -
Page 6: Specifications And Limitations
TOTAL GYM JUMP TRAINER OWNER’S GUIDE | SPECIFICATIONS & LIMITATIONS ® Specifications & Limitations • Glideboard Range of Motion: 38 inches [97 cm] • Floor Space: 24 square feet [2.2 square meters] • Weight Capacity: Maximum user weight capacity of 400 lbs [180 kg] •... -
Page 7: Assembly Instructions
5 mm Hex Key ACCORDANCE WITH THESE DIRECTIONS. 4 mm Hex Key STEP 1. Carefully unpack all the parts and the hardware kit for your Total Gym Jump Trainer and inspect to see if anything is missing or damaged. Contact Total Gym M8x40BH... - Page 8 TOTAL GYM JUMP TRAINER OWNER’S GUIDE | ASSEMBLY & INSTALLATION ® DECIDE WHICH STEP 2. Insert the Left Squat Strut on to STEP 3. Repeat STEP 2 on other side, Next, attach Front Base to holes 1, 2 and the Left Rail by positioning the bottom...
- Page 9 PHYSICAL Hole 1 THERAPY Setting. Only do this step if you Incline Strut want your Jump Trainer assembled for the Next, attach Front Base to holes 2, 3 and FITNESS Setting. 4 as shown below using hardware (H,K,J) as indicated.
- Page 10 ® STEP 11. IMPORTANT: RETURN TO STEP 8. Using the hardware (D, C) as STEP 9. Lay the Jump Trainer on its side. STEP 10. Turn the Jump Trainer upright STEPS 2-4 AND TIGHTEN ALL SCREWS indicated; attach the Rear Base to the Using the hardware (C, E) as indicated;...
- Page 11 OWNER’S GUIDE | ASSEMBLY & INSTALLATION ® STEP 12. Move the Jump Trainer to the Bolt down machine at Front Base through STEP 13. Anchor the Front Base to the floor using appropriate bolts for your floor as permanent location and position it properly the Bolt Holes provided on the Anchor shown below.
-
Page 12: Getting Started
As a facility offering the use of the Total When using your Total Gym Jump Trainer, Follow the instructions on the placard Gym Jump Trainer to customers, or as a wear athletic shoes and comfortable as illustrated below by doing the desired INCREASE RESISTANCE personal user of the product, you –... -
Page 13: Slide Distance Regulator (Sdr) Instructions
TOTAL GYM JUMP TRAINER OWNER’S GUIDE | EXERCISE INSTRUCTIONS ® Slide Distance Resistance Charts Regulator (SDR) JUMP RESISTANCE CHART – FITNESS SETTING Instructions Nominal Squat Resistance % of Your Body Weight % of Level Bodyweight The function of the Slide Distance Regulator... -
Page 14: Maintenance And Care
Maintenance and Care Glideboard: Roller Removal and Assembly MAINTENANCE SCHEDULE Your Total Gym Jump Trainer unit will offer you or your facility and your clientele DAILY years of easy operation if you follow these STEP 1. Remove the six M6 screws from STEP 4. -
Page 15: Warranty Information
Frame – 5 years; Parts & Upholstery – 1 year; Foam, Rubber & Bands – 90 days agents for damage during shipping. If the package appears to have sustained damage in shipping, or if your Total Gym Jump Trainer appears to have shifted in delivery but LIMITED WARRANTY... - Page 16 ©2015 Total Gym Global Corp. All rights reserved. Total Gym is a registered trademark of Total Gym Global Corp. Unauthorized duplication of this booklet is punishable by law. Total Gym Jump Trainer : Covered by one or more of U.S. Pat. Nos. 7,775,950, 8,075,457, D574,901, Taiwan Patent No. D129218, New Zealand Patent No. 409987, Japan Patent No. 1331682, Australia Patent No. 318091, and other patent(s) pending.