General Information About The Print Server - Black Box LEP0000A User Manual

PURE NETWORKING 10/100 MINI PRINT SERVERS USERS' MANUAL

8.1 General Information About the Print Server

Every time you run the print server's configuration utility, the system will initially
delay for several seconds because the utility is using the system's available network
protocols to search for all print servers on the network. Therefore, you must first
select the print server you would like to configure from the Print Server Name's
field under the General tab (see Figure 8-1). The system will, at the same time,
display the selected print server's model number and firmware version.
Figure 8-1. Print server configuration, General tab.
You may select any available printer port in the Print Server Port's field at the
bottom of that page, then press the TestPrint button to test print.
76