Changing Device Configuration - Black Box LEP0000A User Manual

9.2.6 C D
HANGING
The Device Configuration page (see Figure 9-8) allows you to set several options.
Print Server info
Save to Print Server
• Alias name, an alternate name for the print server (in addition to the
PSxxxxxx name printed on the label).
• NetWare Protocol Support. This determines whether or not the print server
supports the NetWare printing function.
• NetBEUI Protocol Support. Determines whether or not the print server
supports the NetBEUI network protocol.
• The POST diagnostic printout determines whether or not a diagnostic
printout should be printed to the attached printer.
• The Save to Print Server button saves the configuration to the print server.
• Type new password; changes to the new password.
• Retype new password; confirm the new password.
• Change password button: Saves the new password to the print server.
The print server will verify your password (it will ignore the User Name item) when
you save the configuration.
C
EVICE ONFIGURATION
Figure 9-8. Device Configuration page.
CHAPTER 9: Web Management
105