C. Installing the Electric Kit
•
Remove four screws to remove cover from the control
box.
Figure 5.1 Remove Control Cover
•
Remove the junction box bracket by prying loose
with a screwdriver. Remove the two screws shown in
Figure 5.2. Cut out and remove insulation from behind
junction box bracket as shown in Figure 5.3.
Remove
2 screws
Junction
Box Bracket
Figure 5.2 Remove Junction Box Bracket & Two Screws
Figure 5.3 Cut and Remove Insulation
Outdoor Lifestyles by Hearth & Home Technologies Inc. • Carolina-B Installation Manual • 4066-500 Rev. B • 5/14
•
Make hand bends to bracket as shown in Figure 5.4:
Figure 5.4 Hand-bend Bracket
•
Fasten bracket to junction box with two screws
(provided with junction box).
Figure 5.5 Fasten Bracket to Junction Box
•
Thread wire into junction box.
•
Place junction box into the control box, matching holes
as shown, and fasten with the two screws removed in
Figure 5.6.
Figure 5.6 Place & Fasten Junction Box
Match holes
15