Select Options - Asko W6424W Operating Instructions Manual

Operating instructions
6

Select options

You can select options to adjust the
wash program to suit your own specific
requirements. The available options depend on
the selected program. If the option is available
for the selected program, the symbols lights up
when you press the button.
The machine will remember the options you
select for each program (with one exception
– Delayed Start). You can still change the
selected options the next time you select a
particular program.
Temperature
• Select the temperature by pressing
the button until the LED by the correct
temperature lights.
• You can select temperatures between
68°F (20°C) and 203°F (95°C). You cannot
choose a temperature higher than 104°F
(40°C) for Wool/Hand Wash. The maximum
temperature for Perma Press or Everyday
Wear (Easy care) is 140°F (60°C).
Spin
• Select the spin speed by pressing the button
until the LED by the correct speed lights.
• You can select speeds between 400
and 1200 rpm, No spin, or No drain. The
maximum spin speed varies according to the
selected program, so check the LEDs around
the button.
• , means that the program does not
include a spin cycle and ends by draining.
105˚ 205˚ 400
85˚ 140˚
Cold 120˚
Customer Care Center
1-800-898-1879
www.askona.com
1200
1000
800
• No drain means that the program does
not include a spin cycle and ends with the
water from the final rinse still in the machine.
The washing will remain covered by the
water from the final rinse, stopping it from
getting wrinkled. If you have selected "No
drain", you must select the Spin & Drain
program and the symbol (no spin) once
the program has ended to drain the water
from the machine before you open the
washer door.
Super Rinse
Use the Super Rinse option if you want to
increase the number of rinses. The maximum
number of rinses is seven and varies depending
on the selected program. Recommended for
persons with extremely sensitive skin and/or in
areas with very soft water. This option cannot be
selected with Quick, Rinse, or Spin & Drain.
• Select Super Rinse by pressing the button
under the symbol.
• An LED next to the button lights when this
option is activated.
Delayed start
When you select Delayed Start, the machine
will start 1-24 hours after you press the Start/
Stop button.
• Press the button by the symbol to activate
Delayed Start.
• By pressing the button again, you can delay
the start in whole hours up to a maximum of
24 hours.
21