Select Options - Asko W6884 Eco Operating Instructions Manual

Washing
6

Select options

You can select options to adjust the wash program to suit your own specific requirements. The
available options depend on the selected program. If the option is available for the selected program,
the symbols lights up when you press the button.
The machine will remember the options you select for each program (with one exception – Delayed Start).
You can still change the selected options the next time you select the program in question.
Temperature
• Select the temperature by pressing the -/+ buttons until the desired temperature is displayed.
• You can select temperatures between Cold (-°C) and 90°C. If you select Cold, the washing temperature
will be the same as that of the water entering the machine. For Wool/hand wash you cannot choose
a temperature higher than 40°C. For Time program and Easy Care, the maximum temperature is 60°C.
Spin
• Select the spin speed by pressing the -/+ buttons until the desired spin speed is displayed.
•
You can select speeds between 400 and 1800 rpm, 0
spin speed varies according to the program selected. The speed is shown in the display.
•
0 , means that the program does not include a spin cycle and ends by draining.
• No D, No drain means that the program does not include a spin cycle and ends with the water from
the final rinse still in the machine. The washing will remain covered by the water from the final rinse,
stopping it from getting creased. If you have selected "No drain", once the program has finished you
must select either Spin or Drain to empty the machine of water before you open the washer door.
Delayed Start
• Select Delayed Start by pressing the + button under the time display. Delayed Start is shown for three
seconds.
• By pressing the + and - buttons under the time display you can delay the start in whole hours up to a
maximum of 24 hours. The symbol for Delayed Start lights up beside the number of hours.
• Press Start/Stop, and the machine counts down 1 hour at a time and starts after the selected delay.
If you change your mind and want to cancel Delayed Start, you must press and hold Start/Stop for three
seconds.
Note!
Make sure the detergent compartment is completely dry before you add detergent, otherwise there is
a risk that the detergent will clump before the machine starts.
Super Rinse
Use the Super Rinse option if you want to increase the number of rinses. The maximum number of rinses
is seven, and the number of rinses varies depending on the selected program. Recommended for persons
with extremely sensitive skin and/or in areas with very soft water.
• Select Super Rinse by pressing the button under the symbol.
• The symbol above the button lights when this option is activated.
(no spin) or No D(no drain). The maximum
15