Select Options - Asko W6564 Operating Instructions Manual

Washing
6

Select options

You can select options to adjust the wash program to suit your own specific requirements. The
available options depend on the selected program. If the option is available for the selected program,
the symbols lights up when you press the button.
The machine will remember the options you select for each program (with one exception – Delayed Start).
You can still change the selected options the next time you select the program in question.
Temperature
• Select the temperature by pressing the button until the LED by the desired temperature lights.
• Time program and Easy Care, the maximum temperature is 60°C.
You can select temperatures between 20°C and 95°C. For Wool/Hand you cannot choose a temperature
higher than 40°C, when choosing Synthetics or Easy Care the maximum temperature is 60°C.
Spin
• Select the spin speed by pressing the button until the LED by the desired speed lights.
• You can select speeds between 400 and 1600 rpm, No spin or No drain. The maximum spin speed
varies according to the program selected, so check the LEDs around the button.
•
, means that the program does not include a spin cycle and ends by draining.
•
No drain means that the program does not include a spin cycle and ends with the water from the
final rinse still in the machine. The washing will remain covered by the water from the final rinse,
stopping it from getting creased. If you have selected "No drain", Select the Spin & Drain program and
the symbol (no spin) at the end of the program to empty the machine of water before opening the
washer door.
Delayed Start
• Press the button by the symbol to activate Delayed Start.
• By pressing the button again you can delay the start in whole hours up to a maximum of 24 hours.
• Press the Start button, and the machine counts down 1 hour at a time and starts after the selected
delay.
Note!
Make sure the detergent compartment is completely dry before you add detergent, otherwise there is
a risk that the detergent will clump before the machine starts.
Super Rinse
• Select Super Rinse by pressing the button by the symbol.
• An LED next to the button lights when this option is activated.
15