Before Use; Before Using For The First Use; Turning The Appliance On/Off - Miele KWT 1601 SF Operating And Installation Instructions

Before using for the first use

The stainless steel surface of the
appliance is protected with a plastic
film, which protects it during shipping.
Do not remove this protective film until
the appliance has been completely
installed.
After removing the protective film clean
the exterior surface with the supplied
stainless steel agent. This will aid in
preventing resoiling.
^ Clean the inside of the appliance and
the accessories with a mild solution
of warm water and liquid dish soap.
Dry with a soft cloth.
After installing the unit, wait at least
30 minutes before switching it on.
During transport, the fluids in the
refrigeration system may have
shifted, and will need some time to
settle.

Turning the appliance On/Off

^ Open the upper appliance door.
^ Turn the appliance On/Off with the
main switch.
The main switch is located on the
right-side underneath the control panel.
All three zones are switched on or
off together.
Once on, the appliance begins cooling.
When the door is open, the interior
lights come on.
The access button will light in the
control panel.
The preset temperatures (factory
settings) are reached after a few hours.
,
Turning off the appliance with
the main switch does not safely
isolate it from the power supply.

Before use

9