Oki MC-860 / CX2633MFP Service & Troubleshooting Manual page 41

<< When
DENS ADJ EXECUTE
• The Density error correction test is executed. (The
• When the test is complete, the test result (OK or error name) is displayed in the
upper column of the display window and
column of the display window.
When the is pressed, test results are incremented and displayed in order.
(2) key
When the is pressed, test results are decremented and displayed in order.
(8) key
When the is pressed, screen returns to the item 2 status.
(4) key
• When the
(#) key
lamp lights) and screen returns to the item 2 status.
[ON LINE]
•
<< When
DENS ADJ RESULT
The key operations are the same as those above.
<< When
DENS ADJ PAR-SET
The message is displayed but does not function.
<<
AUTO CALIBRATION
• Automatic setting of the density sensor sensitivity correction value is executed.
(The
[ON LINE]
• When the test is complete, the test result (OK or error name) is displayed in the
upper column of the display window and
column of the display window.
When the is pressed, screen returns to the item 2 status.
(4) key
When the is pressed while the test in progress, the test is interrupted (the [ON
(#) key
LINE] lamp lights) and screen returns to the item2 status.
When the is pressed, the screen exits the test. (Screen returns to the item 1 condition.)
(4) key
Display
DENS ADJ EXECUTE
DENS ADJ PAR-SET
DENS ADJ RESULT
AUTO CALIBRATION
is executed >>
is pressed while the test in progress, the test is interrupted (the
is executed >>
is executed >>
is executed >>
lamp blinks.)
Details
Execution of density correction
The message is displayed but does not
function.
Referring to the result of density correction
Automatic setting of density sensor
sensitivity correction value
[ON LINE]
is displayed in the lower
**** RESULT
is displayed in the lower
**** RESULT
lamp blinks.)
41