Oki MC-860 / CX2633MFP Service & Troubleshooting Manual page 37

Monitoring Printer Environmental Conditions
The following printer environmental conditions can be monitored during generation of
test prints.
The following messages are displayed during test print.
Number of test prints (unit: sheet)
P *** =
Print wait time (unit: sheet)
W*** =
Pressing the switches the display. When the
(2) key
the test. (Screen returns to the item 1 condition.)
Environment temperature measurement value [unit: °C]
T =*** =
Upper heater temperature measurement value. [unit: °C]
U =*** =
Environment humidity measurement value [unit: %]
H =***% =
Lower thermistor measurement value. [unit: °C]
L = *** =
Pressing the switches the display. When the
(2) key
the test. (Screen returns to the item 1 condition.)
KTR, YTR, MTR and CTR are the transfer voltage setting values for each color. (measured in KV)
Pressing the switches the display. When the
(2) key
the test. (Screen returns to the item 1 condition.)
KR, YR, MR, CR are transfer roller resistance values for each color. [measured in μA]
Pressing the switches the display. When the
(2) key
the test. (Screen returns to the item 1 condition.)
ETMP: Hopping motor standard speed correction parameter (Environment temperature) [unit: DEC]
key is pressed, the screen exits
(#)
[###] = target temperature [unit: °C]
= Lower thermistor AD value [unit: HEX]
[###]
key is pressed, the screen exits
(#)
key is pressed, the screen exits
(#)
key is pressed, the screen exits
(#)
37