Table of Contents
Advertisement
Boot Up Numlock Status (On)
This item defines if the keyboard Num Lock key is active when your system is
started.
APIC Mode (Enabled)
This item allows you to enable or disable the APCI (Advanced Programmable Inter-
rupt Controller) mode. APIC provides symmetric multi-processing (SMP) for sys-
tems, allowing support for up to 60 processors.
1st/2nd/3rd Boot Device (ST31660812AS/PIONEER DVD-RW DVR-/1st
FLOPPY DRIVE)
Use this item to determine the device order the computer used to look for an
operating system to load at start-up time. The devices showed here will be different
depending on the exact devices installed on your motherboard.
Hard Disk Drives (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
CMOS Setup Utility - Copyright (C) 1985-2007, American Megatrends, Inc.
Hard Disk Drives
1st Drive
: Move
F1:General Help
Press <Esc> to return to the Advanced setup page.
Introducing the Motherboard
Hard Disk Drives
WDC WD1600JS-22MHB0
Enter : Select
+/-/: Value
F10: Save ESC: Exit
F9: Optimized Defaults
Help Item
Specifies the boot
sequence from the
available devices.
33
Advertisement
Table of Contents
