Connecting I/O Devices - ECS GF7100PVT-M User Manual

Table of Contents

Advertisement

Connecting I/O Devices

The backplane of the motherboard has the following I/O ports:
PS2 Mouse
Use the upper PS/2 port to connect a PS/2 pointing device.
PS2 Keyboard
Use the lower PS/2 port to connect a PS/2 keyboard.
Serial Port
Use the COM port to connect serial devices such as mouse
(COM1)
or fax/modems.
VGA Port
Connect your monitor to the VGA port.
DVI Port
Use the DVI port to connect the monitor.
.
USB Ports
Use the USB ports to connect USB devices.
LAN Port
Connect an RJ-45 jack to the LAN port to connect your
(optional)
computer to the Network.
Use the audio jacks to connect audio devices. The D port is
Audio Ports
for stereo line-in signal, while the F port is for microphone
in signal. This motherboard supports 8-channel audio de-
vices that correspond to the A,B, C, and E port respec-
tively. In addition, all of the 3 ports, B, C, and E provide
users with both right & left channels individually. Users
please refer to the following note for specific port function
definition.
A: Center & Woofer
B: Back Surround
C: Side Surround
The above port definition can be changed to audio input or
audio output by changing the driver utility setting.
This concludes Chapter 2. The next chapter covers the BIOS.
Installing the Motherboard
D: Line-in
E: Front Out
F: Mic_in Rear
25

Advertisement

Table of Contents
loading

Table of Contents