Oki C711 Maintenance Manual page 54

Oki Data CONFIDENTIAL
(4)-5. Install the side cover.
Front cover
(4)-6. Connect the power cord and printer cable to the printer, and turn the
power on.
44205401TH Rev.1
Press the SD memory card until it clicks.
Install the side cover.
F i x t h e s i d e c ove r w i t h t h e s c r ew.
(one place)
Close the top cover and front cover.
Top cover
Side cover
Screw
(4)-7. Print the setting content and confirm if the SD memory card is installed
properly.
Print the setting content with following the procedure in chapter 3.6.
Confirm the SD Memory Card capacity displayed in [SD Card].
Memo The capacity of SD memory card might be different from the example of
the above figure.
Note! Please reinstall the SD memory card when the capacity of SD Card is
not displayed.
And, the printer driver setup for recognizing the SD memory card disk is required.
If the printer driver is not set up, please set up the printer driver completely referring to
the user's manual (Setup) firstly, and then finish the following setting procedure.
3. Set up
54 /