Oki C711 Maintenance Manual page 95

Oki Data CONFIDENTIAL
Item Adjustment contents
14 Menu Displays the setup values that have been
setup value set in the printer (CU).
confirmation
15 Printer Verifies the Mac address and various F/W
information versions of the printer.
confirmation
16 Verifies the Verifies the CPU information of if the
installed installed CPU and information of the
CPU/ installed memory.
memory
values.
17 Test print Executes the local print function, and
sends the specified file.
Adjustment objective: Checks operation of
the printer as the standalone printer, and
sends the downloaded file.
18 Switch scan Execution of switch scan test
test
Adjustment objective: Operation check of
the respective sensors
19 Motor clutch Execution of motor clutch test
test
Adjustment objective: Operation check of
the respective motors and clutches.
20 Color Color registration correction test
registration
Execution of color registration correction
correction
test.
test
21 Density Execution of density correction test
correction
test
22 Automatic Setting the automatic density correction
density control parameter
correction
control
parameter
setting
[Use
prohibition]
23 Counter Checking reading of the consumable
display items counter, consumables continue
counter and waste toner counter.
24 Local Switching of Factory mode and Shipping
parameter mode, confirmation of fuse status
setting
44205401TH Rev.1
Maintenance Operation on the
Utilities operator panel (Item
Operation number corresponds
Manual item to that of the
number Maintenance Manual.)
Section Menu map print 25 Engine
2.4.1.3.2 (Refer to the User's
Manual.)
Section Menu map print 26 Translate
2.4.1.3.3 (Refer to the User's
Manual.)
Section Menu map print
2.4.1.3.4 (Refer to the User's
Manual.)
Section Local print
2.4.1.4.1
(Refer to the system
specification.)
Section
2.4.1.5.1
Section
2.4.1.5.2
Section
2.4.1.5.3
Section
2.4.1.5.4
Use
prohibition
Section
2.4.1.5.6
Section
2.4.1.5.7
Item Adjustment contents
Setting values of the engine parameter
parameter items
setting
Setting set values of translate parameter
Parameter items.
Setting
Note! Do not perform any operations/settings for the items that are specified as [Use of
this menu item is prohibited.] If this caution is not observed, it may result in danger of
abnormal operations of the printer.
5. Maintenance Menu
Maintenance Operation on the
Utilities operator panel (Item
Operation number corresponds
Manual item to that of the
number Maintenance Manual.)
Section
2.4.1.5.8
Section
2.4.1.5.9
95 /