Annual Test (Inspection And Testing During Operation); Disposing Of Equipment; Manufacturer's Declaration To The End User; Meeting The Requirements Of Rohs - EWM Tetrix 351 Comfort FW Operating Instructions Manual

Maintenance, care and disposal

Disposing of equipment

6.2.3

Annual test (inspection and testing during operation)

The welding machine may only be tested by competent, capable personsl.
A capable person is one who, because of his training, knowledge and experience, is
able to recognise the dangers that can occur while testing welding power sources as
well as possible subsequent damage and who is able to implement the required safety
procedures.
For further information, please see the accompanying supplementary sheets "Machine
and Company Data, Maintenance and Testing, Warranty"!
A periodic test according to IEC 60974-4 "Periodic inspection and test" has to be carried out. In addition
to the regulations on testing given here, the relevant local laws and regulations must also be observed.
6.3 Disposing of equipment
Proper disposal!
The machine contains valuable raw materials, which should be recycled, and
electronic components, which must be disposed of.
•
Do not dispose of in household waste!
•
Observe the local regulations regarding disposal!
6.3.1

Manufacturer's declaration to the end user

•
According to European provisions (guideline 2002/96/EG of the European Parliament and the Council
of January, 27th 2003), used electric and electronic equipment may no longer be placed in unsorted
municipal waste. It must be collected separately. The symbol depicting a waste container on wheels
indicates that the equipment must be collected separately.
This machine is to be placed for disposal or recycling in the waste separation systems provided for
this purpose.
•
According to German law (law governing the distribution, taking back and environmentally correct
disposal of electric and electronic equipment (ElektroG) from 16.03.2005), used machines are to be
placed in a collection system separate from unsorted municipal waste. The public waste management
utilities (communities) have created collection points at which used equipment from private
households can be disposed of free of charge.
•
Information about giving back used equipment or about collections can be obtained from the
respective municipal administration office.
•
EWM participates in an approved waste disposal and recycling system and is registered in the Used
Electrical Equipment Register (EAR) under number WEEE DE 57686922.
•
In addition to this, returns are also possible throughout Europe via EWM sales partners.
6.4

Meeting the requirements of RoHS

We, EWM AG Mündersbach, hereby confirm that all products supplied by us which are affected by the
RoHS Directive, meet the requirements of the RoHS (Directive 2002/95/EC).
78
NOTE
NOTE
099-000117-EW501
26.08.2014