Standard Equipment - Compass Knight 3D Instruction Manual

This model is packed according to assembling steps
for each step of assembly when building
Canopy
Step 1
Step 5
ORDER OF SWITCH ON OFF
When switching the R/C system ON or OFF, always proceed in the following order:
When switching ON:
Place the throttle control stick into motor stop position.
Turn on the transmitter.
Turn on the receiver.
Start the engine.
Operate your model.
When switching OFF:
Turn off the motor (place the throttle control stick into motor stop position).
Shut down the engine
Wait until the rotor head has stopped spinning.
Turn off receiver.
Turn off transmitter.
:
.
.
.
.
:
.
.
.
.

Standard Equipment

.
。
Frame Set
Step 2
Step 6
.
.
. Do not open all the bags at one time Open only one bag
Rotor Head
Step 3
Step 9
/
:
.
。
Long items
/
。
Step 4
Decal