Parts Supplied; Installation Using The Screw Holes On The Side Of This Product - Pioneer SPH-DA110 AppRadio Operation Manual

Installation

Parts supplied

The display unit
Flush surface screw
(5 mm × 9 mm)
(6 pcs.)
Installation using the screw holes
on the side of this product
1 Fasten the unit to the factory radio-
mounting bracket.
Position this product so that its screw holes
are aligned with the screw holes of the brack-
et, and tighten the screws at three or four lo-
Truss head screw
cations on each side. Use either the truss
(5 mm × 8 mm)
head screws (5 mm × 8 mm) or flush surface
(6 pcs.)
screws (5 mm × 9 mm), depending on the
shape of the bracket's screw holes.
If the tab interferes with installation,
you may bend it down out of the way.
Factory radio-mounting bracket
Truss head screw or
flush surface screw
Be sure to use the
screws supplied
with this product.
Dashboard or console
En
Chapter
03
17