Pioneer SPH-DA110 AppRadio Operation Manual page 112

Registering your Bluetooth device
1.Tap them icon on the upper right
corner of the Home screen to
display the phone menu.
2.Tap the
M·M
icon to display the
"Biuetooth Connection Menu".
3.Tap the [Connection].
4.Tap t h e - icon to display a list
of registerable devices.
5. Tap the name of the device you
want to register in the device list.
6.When PIN code input is required,
enter the PIN code (the default
PIN code is "0000").
The icons in the device list are
illuminated as follows.
+-
Connectoon X
.. r.i
QlDlGJ •
Conditions
Illuminates when your mobile
device is successfully con-
nected with the H FP (Hands-
Free Profile).
Illuminates when your audio
device is successfully con-
nected with the A2DP
(Advanced Audio Distribution
Profile)/AVRCP (AudioNideo
Remote Control Profile).
Illuminates when the Bluetooth
connection is established with
the SPP (Serial Port Profile).
Disconnecting and re-connecting your device
Tap the name of your device in the registered device list to disconnect the Bluetooth
connection . To connect your device and this product again, tap the name of your
device in the registered device list.
Hands-free phoning
You can co ntrol the Bluetooth connection of the mobile device, and make a call
using the incoming/outgoing call histories, transferred contacts, or by dialing.