Step 2 - Attach Ram Ball To The Vx6 - Honeywell VX6 Installation Instructions Manual

Step 2 – Attach RAM Ball to the VX6
1. Turn the VX6 off before attaching the RAM mount ball.
2. Place the VX6 face down on a stable surface.
3. Position the RAM ball bracket on the rear of the VX6, aligning the curved edge on the RAM mount bracket with the
curved edge on the VX6.
4. Attach with four 1/4-20x5/8 bolts, using one flat washer and one locking washer per bolt. Place the locking washer on
the bolt before the flat washer.
3-7